Clear-Com TEMPEST 2400 Especificaciones Pagina 81
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Clear-Com Communication Systems Page 81 of 100
Tempest 2400 Wireless Intercom System
Beltstation
Beltstation will not power up
Confirm that battery(ies) is (are) installed correctly.
When using a Lithium-Polymer rechargeable battery, ensure that the battery is fully charged.
When using alkaline AA batteries ensure that batteries are fresh and are all facing the same way. Note
the illustration in the battery compartment.
Press and hold the Power button on the back of the beltstation for 2 seconds to power on.
Beltstation will not Pair with Base Station
Confirm that the base station you are Pairing with is powered on and in Operational Mode and the
beltstation is powered off. Connect the Pairing cable from the base station to the beltstation. Turn the
beltstation power on. The Pairing process takes approximately four seconds.
If Pairing is successful the message “Pairing Complete” will appear on the beltstation LCD for
approximately five seconds and the beltstation name will appear in the first available slot on the base
station LCD. The base station name will appear on the beltstation LCD.
If Pairing is not successful no message will appear.
If Pairing is not successful try to Pair a different beltstation with the base station. If neither of the
beltstations will Pair, substitute a new Pairing cable.
If successful Pairing any beltstation with the base station, try the following procedure on the beltstation
that will not Pair:
Restore memory settings to Factory Defaults by pressing MENU, select “Belt Settings;” select “Tech
Menu;” press ENTER to proceed; select “Set Defaults;” select “Restore Factory Defaults;” press ENTER
to confirm; press MENU repeatedly to exit. If still not successful, repeat the above procedure but select
“Clear Memory” to delete all memory settings, Pairings, and user settings.
If no beltstation will Pair with the base station, reset the base station memory to “Factory Defaults”.
The final option is to select “Clear Memory” to fully reset the base station. All beltstation Pairings will be
lost with the “Clear Memory” option.
Beltstation will not log into Base Station
Confirm that the beltstation is powered on and has a battery with ample charge.
Confirm that the proper base station is selected on the beltstation’s Select Base menu.
Confirm that there is an available slot on the base station.
Check Static / Dynamic display settings on the base station. If Static is selected check the beltstation slot
assignment.
Determine if any beltstation is logged on to the base station.
Re-Pair the beltstation to the base station.
Attempt to log into another base station, if available.
Follow the memory reset procedure.
Buttons on the Beltstation do not function
A number of buttons on the beltstation can have alternate functions that the user can select.
If a button on the beltstation is not working as expected, re-confirm all settings and any alternate function
assignment in the menu. The button may have been reassigned wirelessly from the base station or by T-
Desk. Confirm that the function is available for use. If the reassignment involves any GPO, confirm that
menu selection, the connections, and the equipment functionality.
- Table of Contents 3
- A/C Power Warning 9
- Thank you from Clear-Com 10
- Battery Safety 11
- Maintenance and Care 12
- Quick Start Guide 13
- General Description 15
- Theory of Operation 17
- System Features 19
- What’s In The Box 19
- Other Items You May Need 20
- Base Station 21
- Choose a Location 22
- Base Station Location 22
- Power Connections 23
- Antenna Location 24
- Antenna Configuration 25
- Configure the Base Station 28
- Adjust Sidetone 29
- Selecting a Frequency Band 30
- Name Each Station 32
- Front Panel Lock 34
- Call Function 34
- GPO Relay Contacts 35
- Auxiliary Input/Output 36
- Stage Announce (SA) 36
- Default Settings 37
- Controls 39
- Echo Cancellation Menu 41
- Auto-Null Explained 41
- Auto-Null Procedure 43
- Test for Echo 43
- Manual Null 43
- Other Causes of Echo 44
- 2-Wire Wiring Schemes 45
- 2-W Audio links 46
- Accu-Sync 49
- Master Mode 50
- Base Station Controls 54
- Front Panel Left 54
- 7- Volume Control 55
- 8- Menu Button 55
- 9- Enter Button 55
- 10- Buttons 1 - 5 55
- 11- LCD 55
- Front Panel Right 56
- 6- IN Level Control 57
- 7- OUT Level Control 57
- 8- USB Connector 57
- 10- Power ON/OFF Switch 57
- Rear Panel Left 58
- Rear Panel Right 58
- Base Station Menu 60
- Remote Transceiver 62
- Transceiver controls 63
- Beltstation 64
- Beltstation Setup 66
- Power Options 67
- Beltstation Power On/Off 67
- Pairing with a Base Station 68
- Name Equipment 70
- Personal Preferences 70
- Set Mic Gain 71
- Wireless ISO 72
- Beltstation Overview 73
- Talk Button A/B and C/D 75
- Beltstation Menu 76
- How Do I …? 77
- From the Beltstation: 78
- From the Base Station: 78
- From the beltstation: 78
- Trouble Shooting 79
- Tempest Remote Transceiver 82
- 4-Wire intercom systems 83
- Specifications 84
- FCC Information 87
- Tempest Part Numbers 90
- Glossary 91
- Limited Warranty 93
- ECHNICAL SUPPORT POLICY 96
- EPAIR POLICY 98
Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Clear-Com TEMPEST 2400
(16 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales