Clear-Com TEMPEST 2400 Especificaciones Pagina 57
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Clear-Com Communication Systems Page 57 of 100
Tempest 2400 Wireless Intercom System
channels. If either a 2-Wire or 4-Wire connection has been enabled for a particular intercom channel, the
corresponding 2-Wire or 4-Wire LED indicator will be illuminated. When no intercom has been enabled,
the corresponding 2-Wire or 4-Wire LED indicators will be off.
6- IN Level Control
In Menu Mode, from the Intercom Levels screen, the IN control adjusts the incoming level of the currently
selected wired intercom channel, from the hardwired intercom system to the Tempest base station. If 2-
Wire is selected the IN Level control adjusts the incoming level of the 2-Wire signal. If 4-Wire is selected
the IN Level control adjusts the incoming level of the 4-Wire signal. If neither 2-Wire nor 4-Wire is
selected the IN Level control is inactive.
7- OUT Level Control
In Menu Mode, from the Intercom Levels screen, the OUT level control adjusts the outgoing level of the
currently selected wired intercom channel, going to the hardwired intercom system from the Tempest
base station. If 2-Wire is selected the OUT Level control adjusts the outgoing level of the 2-Wire signal. If
4-Wire is selected the OUT Level control adjusts the outgoing level of the 4-Wire signal. If neither 2-Wire
nor 4-Wire is selected the OUT Level control is inactive.
8- USB Connector
The USB connector is used to update the Tempest base station firmware and is not used in normal
operation.
9- Beltstation Program Connector
The Beltstation Program connector is used to Pair the base station with beltstations. To pair the base
station with a particular beltstation, ensure that the base station is powered on and in Operational Mode
(not in Menu Mode). Ensure that the beltstation is powered off. Plug one end of the Pairing cable into the
base station, and plug the other end of the Pairing cable into the beltstation. Turn the beltstation power on
by pressing and holding the beltstation Power ON/OFF switch for two seconds. The Pairing process
happens automatically and the message “Pairing Complete” will appear on the beltstation LCD for
approximately three seconds when done. Always power cycle the beltstation after pairing.
10- Power ON/OFF Switch
The ON/OFF switch is used to turn the base station power (AC or DC) on and off.
- Table of Contents 3
- A/C Power Warning 9
- Thank you from Clear-Com 10
- Battery Safety 11
- Maintenance and Care 12
- Quick Start Guide 13
- General Description 15
- Theory of Operation 17
- System Features 19
- What’s In The Box 19
- Other Items You May Need 20
- Base Station 21
- Choose a Location 22
- Base Station Location 22
- Power Connections 23
- Antenna Location 24
- Antenna Configuration 25
- Configure the Base Station 28
- Adjust Sidetone 29
- Selecting a Frequency Band 30
- Name Each Station 32
- Front Panel Lock 34
- Call Function 34
- GPO Relay Contacts 35
- Auxiliary Input/Output 36
- Stage Announce (SA) 36
- Default Settings 37
- Controls 39
- Echo Cancellation Menu 41
- Auto-Null Explained 41
- Auto-Null Procedure 43
- Test for Echo 43
- Manual Null 43
- Other Causes of Echo 44
- 2-Wire Wiring Schemes 45
- 2-W Audio links 46
- Accu-Sync 49
- Master Mode 50
- Base Station Controls 54
- Front Panel Left 54
- 7- Volume Control 55
- 8- Menu Button 55
- 9- Enter Button 55
- 10- Buttons 1 - 5 55
- 11- LCD 55
- Front Panel Right 56
- 6- IN Level Control 57
- 7- OUT Level Control 57
- 8- USB Connector 57
- 10- Power ON/OFF Switch 57
- Rear Panel Left 58
- Rear Panel Right 58
- Base Station Menu 60
- Remote Transceiver 62
- Transceiver controls 63
- Beltstation 64
- Beltstation Setup 66
- Power Options 67
- Beltstation Power On/Off 67
- Pairing with a Base Station 68
- Name Equipment 70
- Personal Preferences 70
- Set Mic Gain 71
- Wireless ISO 72
- Beltstation Overview 73
- Talk Button A/B and C/D 75
- Beltstation Menu 76
- How Do I …? 77
- From the Beltstation: 78
- From the Base Station: 78
- From the beltstation: 78
- Trouble Shooting 79
- Tempest Remote Transceiver 82
- 4-Wire intercom systems 83
- Specifications 84
- FCC Information 87
- Tempest Part Numbers 90
- Glossary 91
- Limited Warranty 93
- ECHNICAL SUPPORT POLICY 96
- EPAIR POLICY 98
Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Clear-Com TEMPEST 2400
(16 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales