Clear-Com TEMPEST 2400 Especificaciones descargar pdf (Pagina 72)

Clear-Com Communication Systems Page 72 of 100

Tempest 2400 Wireless Intercom System

iSelect Roaming – Selecting a Base Station

Installations with multiple base station coverage zones often require users to move from one work zone to

another throughout the day. Tempest handles these transitions with iSelect™ on-command roaming.

Using iSelect, a user can easily change their communication from one base station to another base

station in just a few seconds.

Confirm that the beltstation has been Paired with all required base stations.

Confirm that there is an available slot on the desired base station. If no slot is open, power off one of the

connected beltstations, wait for 15 seconds, and proceed.

In the beltstation menu select the desired base station: Press MENU and select “Select Base”. Scroll to

the desired base station and press ENTER. Press MENU to exit.

Tempest Wireless beltstations remember the last 64 base stations to which they have been Paired.

Wireless ISO

Wireless ISO (isolate), sometimes referred as wireless talk-around is a wireless-only intercom feature that

allows communication among wireless beltstations only. When a wired intercom system is connected,

Wireless ISO communicates through the wireless portion of the system only. The base station front panel

headset does not receive ISO audio.

Wireless ISO is enabled by default and is available only on channel A or B. It is activated by pressing and

holding ENTER for the selected channel A or B. ENTER enables the headset mic regardless of the A/B

Talk button.

Wireless ISO only operates in Operational mode. It does not operate in Menu mode.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Sin comentarios

Clear-Com TEMPEST 2400 Especificaciones Pagina 72