Clear-Com TEMPEST 2400 Especificaciones descargar pdf (Pagina 21)

Clear-Com Communication Systems Page 21 of 100

Tempest 2400 Wireless Intercom System

¼” Tip/Ring/Screen Connector

The pin-to-pin connections are shown in the table below.

Connector 1 Connector 2

Screen Screen

Ring Ring

Tip Tip

Stage Announce XLR-3F Cable

If you plan to connect the Tempest base station to an external audio device via the Stage

Announce connector, you will need to provide the appropriate XLR-3F cabling.

Relay Access DB-15 Breakout Cable

If you plan to utilize any of the six available relays on the back of the Tempest base station, you

will need to provide an appropriate DB-15 breakout cable to access the Stage Announce Relay

and Individual Relays.

LAN Connection RJ-45 / CAT-5 Cable

If you plan to connect the Tempest base station to a computer or local area network, you will

need to provide the appropriate RJ-45 CAT-5 cabling.

Base Station

Steps to Setup the Base Station

• Choose a location for the base station

• Choose an antenna location and configuration – See page 24.

• Maximize performance – See page 26.

• Configure operation features

1. Set Band – See page 30

2. Set Network Number and Lockout Key – See page 31.

3. Set Static or Dynamic Display – See page 32.

4. Name each base station and beltstation (optional, but encouraged) – See page 32.

• Configure optional features

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Sin comentarios

Clear-Com TEMPEST 2400 Especificaciones Pagina 21