Clear-Com TEMPEST 2400 Especificaciones descargar pdf (Pagina 58)

Clear-Com Communication Systems Page 58 of 100

Tempest 2400 Wireless Intercom System

Rear Panel Left

1- AC Power Input Connector

The IEC AC Power Input Connector accepts the AC power cord. Use this connector with the supplied AC

power cord to power the Tempest base station from AC power between 85 and 260 VAC at 50 – 60

Hertz. The base station will draw approximately 15 Watts (125mA at 120VAC, 65mA at 230VAC)

2- DC Power Input Connector

The DC Power Input Connector accepts a Switchcraft S760 2.1mm x 5.5mm power plug wired as center

positive. Use this connector with a user-supplied cable to power the Tempest base station from DC power

(battery) between 11 and 32 VDC. The base station will draw approximately 12 Watts (990 mA at

12VDC).

3- Antenna Connector

The Antenna Connector is used to connect one of the two antennas to the Tempest base station. The

Antenna Connector is an RP-TNC (Reverse Polarized-TNC) connector. 50 Ohm RF cables used to

connect to this Antenna Connector must be properly terminated with mating RP-TNC connectors. When

using the 2.4GHz base station it is important to ensure that both antennas are connected to ensure

proper system operation.

4- Intercom Channel A/B/C/D Connectors

The Intercom Channel connectors (A, B, C, D) allow the user to connect the Tempest base station to 2-

Wire external intercom systems or other Tempest base stations. The XLR-3M/F 2-Wire intercom

connectors interface with Clear-Com, RTS, Balanced and other compatible intercom systems. The pairs

of XLR3-M and XLR-3F are electrically identical.

5- RJ-45 4-Wire Intercom A/B/C/D Connectors

The RJ-45 4-Wire Intercom connectors (A/B/C/D) interface with 4-Wire intercom systems and devices

including Clear-Com matrix systems. This is an intercom audio-only connector and does not support data

transfer. The connector is balanced and transformer isolated. Nominal line level is -4 to +8 dBu.

Rear Panel Right

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 99 100

Sin comentarios

Clear-Com TEMPEST 2400 Especificaciones Pagina 58