Clear-Com TEMPEST 2400 Especificaciones descargar pdf (Pagina 13)

100

Clear-Com Communication Systems Page 13 of 100

Tempest 2400 Wireless Intercom System

Quick Start Guide

What You Will Need

-Base Station

Power cord

2 Base station antennas

1⁄8th inch male-to-male

mini-stereo pairing cable

-Beltstations - Up to 5 per base station

Lithium-Polymer battery and

Charger - 1 per beltstation

-Headsets (customer supplied)

1 per beltstation

1 per base station

1. Connect two whip antennas onto the back of the Base Station.

Select a suitable location for the base station. Tempest is a radio system, broadcasting and receiving RF

signals that are affected by physical and electronic barriers.

• Antennas should be located as high as

possible and away from all obstructions.

• When using Whip (Omni-directional)

antennas, select a location as close as

possible to the center of the area you want to

cover.

• Use alternative antenna options when the

base station is in a rack or other metal

structure, or stacked with other gear. Remote

location antenna placement of up to 1,500 ft.

can be achieved using the Tempest Remote

Transceiver. See the user manual beginning

on page 24, for more details about antenna

placement, recommended cable types, and

other antenna options.

2. Connect the power cord and Power On the Base Station.

3. Install Batteries in Beltstations

Install the Lithium‑Polymer battery in each beltstation. Be certain

that the gold contacts on the battery touch the contacts in the

battery compartment. The battery is shipped with a partial

charge, so charging will be necessary before maximum run time

will be achieved

Insert 3 AA alkaline batteries in the battery compartment.

Always replace the battery cover.

To power on the beltstation press and hold the power button for

approximately 2 seconds. The display will indicate “None

Selected”. Turn the power Off by holding the power button for

four seconds.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 99 100

Comentarios a estos manuales

Sin comentarios

Clear-Com TEMPEST 2400 Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Clear-Com TEMPEST 2400