Tempest
®
Wireless Intercom Systems
6
Beltpack Unique Advantages
Features Advantages Description
5 Beltpacks can
“Dual-Listen” to 2 of
4 intercom channels
Beltpack users can create individual, discreet
2-channel mixes using the A/B and C/D intercom
channel selectors.
Each wireless Beltpack can monitor and talk on two of the four intercom channels
at once. The level for the A/B and C/D intercom channel selectors are set via two
independent volume adjustment knobs creating a mix to suit each user.
Backlit LCD with
operational status
Users can quickly see all important status and
operational information .
Status and settings for Beltpacks are displayed locally on the LCD display to
allow the user to be completely informed as to the channel, talk condition,
battery level, RF signal strength and other features.
“Vibrate Call”
function
A user can have the headset off and still be alerted
to a call.
Any Beltpack can choose to enable “Vibrate Call” as in addition to standard call
alert light or tone.
Point-to-point
capability via the
4-wire interface and
a matrix intercom
When using a 4-wire interface and a matrix
intercom router, a Beltpack user can have direct
contact with any other Beltpack or wired intercom
station.
Beltpacks can be programmed to use any one of four intercom channels that can
be programmed to route back through the wired matrix to a single desk panel or
beltpack.
On-Command
roaming with
iSelect
™
Beltpack users can move between coverage areas
and select which BaseStation to which they want
to connect.
Using the intuitive LCD user interface on the Beltpack, a user can easily change
BaseStation afliation in just a few seconds. Each wireless Beltpack remembers
the last 64 BaseStations with which it has been registered, so selectable roaming
throughout a large facility with several independent Tempest Wireless systems
can be accomplished easily.
Talk switch can be
remote delatched
from either the
BaseStation or the
hard-wire intercom
An open microphone can quickly be delatched or
killed directly from the wireless or wired intercom.
The BaseStation can interpret a Remote Mic Kill signal from the hardwired
intercom and transmit that signal to all of the wireless Beltpacks currently
monitoring that channel. In addition, individual talk buttons on each wireless
Beltpack can be deactivated from the BaseStation or PC interface.
(36 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales